crane 0,0 travis-ci

Crane - Lift containers with ease


Lift containers with ease


Crane is a tool to orchestrate Docker containers. It works by reading in some configuration (JSON or YAML) which describes how to obtain images and how to run containers. Crane is ideally suited for setting up a development environment or continuous integration.


The latest release (2.10.2) can be installed via:

bash -c "`curl -sL`" && sudo mv crane /usr/local/bin/crane

Older releases can be found on the releases page. You can also build Crane yourself by using the standard Go toolchain.

Please have a look at the changelog when upgrading.

Of course, you will need to have Docker (>= 1.6) installed.


Crane is a very light wrapper around the Docker CLI. This means that most commands just call the corresponding Docker command, but for all targeted containers. The basic format is crane <command> <target>, where <command> corresponds to a Docker command, and <target> either is a single container or a group.

When executing commands, keep the following 2 rules in mind:

  1. Crane will apply the command ONLY to the target
  2. Crane will do with other containers in the configuration whatever it takes in order for (1) to succeed

As an example, imagine you have a container web depending on container database. When you execute crane run web, then Crane will start database first, then run web (recreating web if it already exists). There are ways to dynamically extend the target (so that database would be recreated as well for example).

Following are a list of supported commands and possible options:

Command Maps to Explanation and Options
create create Creates containers. Any existing containers are removed first.
run run Runs containers. Any existing containers are removed first.
rm rm Removes containers if they exist. Use --force to kill running containers first.
start start Starts containers if not they are not running yet. Non-existing containers are created first.
stop stop Stops containers if they are running.
kill kill Kills containers if they are running.
pause pause
unpause unpause
exec exec Starts container first if not running yet.
logs logs Logs of containers are multiplexed. Use --follow to follow log output.
stats stats Display resource information about the containers. Use --no-stream to disable auto-refresh.
push push
pull pull
provision pull/build Calls Docker’s pull if no Dockerfile is specified. Otherwise it builds the image, optionally with disabled cache by passing --no-cache.
lift pull/build + run Provisions and runs containers in one go. Use --no-cache to disable build cache.
status - Displays information similar to docker ps for the given target.
generate - Passes the targeted portion of the config through given --template and outputs the result to STDOUT or given --output file.

You can get more information about what’s happening behind the scenes for all commands by using --verbose. Most options have a short version as well, e.g. lift -n. The CLI provides help for every command, e.g. crane help run.


The configuration defines a map of containers in either JSON or YAML. By default, the configuration is expected in a file named crane.json or crane.yaml/crane.yml. The file can also be set via --config or CRANE_CONFIG. If the given path is relative, Crane searches for the configuration in the current directory, then recursively in the parent directory. Dependencies between containers are automatically detected and resolved. The map of containers consists of the name of the container mapped to the container configuration, with the following keys:

  • image (string, required): Name of the image to build/pull
  • requires (array) Container dependencies (experimental)
  • run (object, optional): Parameters mapped to Docker’s run & create.
    • add-host (array) Add custom host-to-IP mappings.
    • blkio-weight (integer) Need Docker >= 1.7
    • blkio-weight-device (array) Need Docker >= 1.10
    • cap-add (array) Add Linux capabilities.
    • cap-drop (array) Drop Linux capabilities.
    • cgroup-parent (string)
    • cidfile (string)
    • cpu-period (integer) Need Docker >= 1.7
    • cpu-quota (integer) Need Docker >= 1.7
    • cpuset (integer)
    • cpu-shares (integer)
    • detach (boolean) sudo docker attach <container name> will work as normal.
    • detach-keys (string) Need Docker >= 1.10
    • device (array) Add host devices.
    • device-read-bps (array) Need Docker >= 1.10
    • device-read-iops (array) Need Docker >= 1.10
    • device-write-bp (array) Need Docker >= 1.10
    • device-write-iops (array) Need Docker >= 1.10
    • dns (array)
    • dns-opt (array) Need Docker >= 1.9
    • dns-search (array)
    • entrypoint (string)
    • env (array/mapping) Can be declared as a string array with "key[=value]" items or a string-to-string mapping where each key: value will be translated to the corresponding "key=value" string.
    • env-file (array)
    • expose (array) Ports to expose to linked containers.
    • group-add (array) Need Docker >= 1.8
    • hostname (string)
    • interactive (boolean)
    • ip (string) ip address. Need Docker >= 1.10
    • ip6 (string) ipv6 address. Need Docker >= 1.10
    • ipc (string) The container:id syntax is not supported, use container:name if you want to reuse another container IPC.
    • isolation (string) Need Docker >= 1.10
    • kernel-memory (string) Need Docker >= 1.9
    • label (array/mapping) Can be declared as a string array with "key[=value]" items or a string-to-string mapping where each key: value will be translated to the corresponding "key=value" string.
    • label-file (array)
    • link (array) Link containers.
    • log-driver (string)
    • log-opt (array) Need Docker >= 1.7
    • lxc-conf (array)
    • mac-address (string)
    • memory (string)
    • memory-reservation (string) Need Docker >= 1.9
    • memory-swap (string)
    • memory-swappiness (int) Need Docker >= 1.8
    • net (string) The container:id syntax is not supported, use container:name if you want to reuse another container network stack.
    • net-alias (array) Need Docker >= 1.10
    • oom-kill-disable (bool) Need Docker >= 1.7
    • oom-score-adj (string) Need Docker >= 1.10
    • pid (string)
    • privileged (boolean)
    • publish (array) Map network ports to the container.
    • publish-all (boolean)
    • read-only (boolean)
    • restart (string) Restart policy.
    • security-opt (array)
    • shm-size (string) Need Docker >= 1.10
    • stop-signal (string) Need Docker >= 1.9
    • sig-proxy (boolean) true by default
    • rm (boolean)
    • tmpfs (array) Need Docker >= 1.10
    • tty (boolean)
    • ulimit (array)
    • user (string)
    • uts (string) Need Docker >= 1.7
    • volume (array) In contrast to plain Docker, the host path can be relative.
    • volume-driver (string) Need Docker >= 1.10
    • volumes-from (array) Mount volumes from other containers
    • workdir (string)
    • cmd (array/string) Command to append to docker run (overwriting CMD).
  • rm (object, optional): Parameters mapped to Docker’s rm.
    • volumes (boolean)
  • start (object, optional): Parameters mapped to Docker’s start.
    • attach (boolean)
    • detach-keys (string) Need Docker >= 1.10
    • interactive (boolean)
  • build (object, optional): Parameters mapped to Docker’s build.
    • context (string)
    • file (string)
    • build-arg (array/mapping) Provide build arguments. Need Docker >= 1.9
  • exec (object, optional): Parameters mapped to Docker’s exec.
    • detach (boolean)
    • detach-keys (string) Need Docker >= 1.10
    • interactive (boolean)
    • privileged (boolean) Need Docker >= 1.9
    • tty (boolean)
    • user (string) Need Docker >= 1.7

Note that basic environment variable expansion (${FOO}, $FOO) is supported throughout the configuration, but advanced shell features such as command substitution ($(cat foo), `cat foo`) or advanced expansions (sp{el,il,al}l, foo*, ~/project, $((A * B)), ${PARAMETER#PATTERN}) are not as the Docker CLI is called directly. Use $$ for escaping a raw $.

See the Docker documentation for more details about the parameters.


Taken from a basic Sinatra blog app, a typical crane.yaml looks like this:

      context: image
    image: michaelsauter/sinatra-example
      publish: ["9292:9292"]
      volume: ["blog:/blog"]
      link: ["postgres:db"]
        - "POSTGRESQL_DB=default"
        - "POSTGRESQL_USER=default"
        - "POSTGRESQL_PASS=default"
      tty: true
      interactive: true
      cmd: "start-blog"
    image: d11wtq/postgres
      detach: true

The specified Docker containers can then be created and started in the correct order with:

crane lift blog

If you want to use JSON instead of YAML, here’s what a simple configuration looks like:

	"containers": {
		"pry": {
			"image": "d11wtq/ruby",
			"run": {
				"interactive": true,
				"tty": true,
				"cmd": "pry"

Advanced Usage

Groups and Targeting

Next to containers, you can also specify groups, and then execute Crane commands against those groups. If you do not specify any target, the command will apply to all containers. However, you can override this by specifying a default group. Also, every container can be targeted individually by using the name of the container. Groups of containers can be specified like this (YAML shown):

  default: ["service1", "database1"]
  databases: ["database1", "database2"]
  services: ["service1", "service2"]

This could be used like so: crane provision service1, crane run databases or crane lift services. crane status is an alias for crane status default in this example. If default were not specified, then crane lift would start database1, database2, service1 and service2.

Extending the target

It is also possible to extend the target to related containers. There are 2 different “dynamic” groups, affected and dependencies (both have a short version a and d). In our example configuration above, when targeting the postgres container, if it had been started earlier, the blog container would be considered to be “affected”. When targeting the blog container, the postgres container would be considered as a “dependency”. Therefore crane run postgres+affected will recreate both postgres and blog. Similarly, crane run blog+dependencies will recreate blog and postgres. It is possible to combine affected and dependencies.

Excluding containers

If you want to exclude a container or a whole group from a Crane command, you can specify this with --exclude <reference> (or via CRANE_EXCLUDE). The flag can be repeated to exclude several containers or groups (use a multi-line environment variable value to pass several references via CRANE_EXCLUDE).

Excluded containers’ declaration and references in the configuration file will be completely ignored, so their dependencies will also be excluded (unless they are also required by other non-excluded containers).

Apart from excluding containers, it is also possible to limit the target to just one container or group with --only (or via CRANE_ONLY). The flag cannot be repeated. Containers outside the targets will not be considered by Crane then.

Both features are experimental, which means they can be changed or even removed in every minor version update.

Ad hoc commands

If you pass a command on the CLI to lift or run, Crane will add a timestamp to the container name (e.g. foo will become foo-1447155694523), making it possible to have multiple containers based on the same Crane config. Those ad hoc containers will have ip, ip6, publish, publish-all and detach disabled, and rm enabled. This feature is experimental, which means it can be changed or even removed in every minor version update.


Docker networks are supported via the top-level config networks, which does not take additional parameters at this stage. As links are not strict dependencies for containers attached to a user-defined network (but simply aliases), requires can be used instead to indicate that a container must be started for another one to be functional. Networks are automatically created by Crane when necessary, and never cleaned up. When a prefix is used, it is also applied to the network.

    requires: ["bar"]
      net: qux
      net: qux

This feature is experimental, which means it can be changed or even removed in every minor version update.


Docker volumes are supported via the top-level config volumes, which does not take additional parameters at this stage. Volumes are automatically created by Crane when necessary, and never cleaned up. When a prefix is used, it is also applied to the volume.

      volume: ["bar:/path"]

This feature is experimental, which means it can be changed or even removed in every minor version update.

Docker for Mac with Unison sync

Crane can optionally make use of Unison to have faster bind-mounts between the host and Docker for Mac. Example config:

    image: alpine
      rm: true
      interactive: true
      tty: true
        - "/path/to/foo:/bar"

The volume synchronisation can be managed via crane mac-sync start /path/to/foo:/bar and crane mac-sync stop /path/to/foo:/bar. The status of all syncs can be queried with crane mac-sync status.

The start command creates a bi-directional sync between the host directory /path/to/foo and the container directory /bar. Unison watches for changes and syncs them as they happen. The sync is implemented via a special container running a Unison server, named e.g. crane_unison_d4b2758da0205c1e0aa9512cd188002a. While a sync is running, Crane replaces --volume /path/to/foo:/bar with --volumes-from crane_unison_d4b2758da0205c1e0aa9512cd188002a in the Docker arguments automatically.

This feature requires Unison 2.48.4 to be installed, see instructions. Different containers or multiple instances of the same container definition can share the same volume container, as the last part of the container name is a MD5 hash over <config-directory>:<host-dir>:<container-dir>.

It is possible to further customize the behaviour of each sync:

  • flags: Defaults to ["-auto", "-batch", "-ignore=Name {.git}", "-confirmbigdel=false", "-prefer=newer", "-repeat=watch"], but can be overriden using anything that you can pass to unison, see the manual. Note that the folder to sync and the socket of the volume container are always added by Crane.
  • image: Defaults to michaelsauter/unison:2.48.4.
  • uid/gid: Defaults to 0/0. Set this to the user/group ID the consuming container expects, e.g. 1000/1000.
  • autostart: Defaults to false. If true the sync is started automatically when a container is using a volume which is configured as a mac sync. Crane basically calls crane mac-sync start /path/to/foo:/bar behind the scenes.

This feature is experimental, which means it can be changed or even removed in every minor version update.


In order to run certain commands before or after key lifecycle events of containers, hooks can be declared in the configuration. They are run synchronously on the host where Crane is installed, outside containers, via an exec call. They may interrupt the flow by returning a non-zero status. If shell features more advanced than basic variable expansion is required, you should explicitly spawn a shell to run the command in (sh -c 'ls *').

Hooks are declared at the top level of the configuration, under the hooks key. See YAML example below:

    image: busybox
      detach: true
      cmd: ["sleep", "50"]
    image: busybox
      detach: true
      cmd: ["sleep", "50"]
    image: busybox
      detach: true
      cmd: ["sleep", "50"]
    - service1
    - service2
    - service2
    - service3
    post-start: echo container from foo started
    post-stop: echo container from bar stopped
    post-stop: echo container service3 stopped

Hooks can be defined on a group level (foo, bar) so that they apply to all containers within that group, or directly on a container (service3). At most one hook can be registered per container and per event. When more than one hook is found for a given container and a given event, the following rules apply:

  • Container-defined hooks have priority over group-defined ones, so in the example above, only “container service3 stopped” will be echoed when stopping service3.
  • A fatal error will be raised at startup when 2 group-inherited hooks conflict. This is not the case in the previous example; even though foo and bar both contain service2, the hooks they declare are disjoint.

The following hooks are currently available: * pre-build: Executed before building an image * post-build: Executed after building an image * pre-start: Executed before starting or running a container * post-start: Executed after starting or running a container * pre-stop: Executed before stopping, killing or removing a running container * post-stop: Executed after stopping, killing or removing a running container

Every hook will have the name of the container for which this hook runs available as the environment variable CRANE_HOOKED_CONTAINER.


By default, Crane executes all commands sequentially. However, you might want to increase the level of parallelism for network-heavy operations, in order to cut down the overall run time. The --parallel/-l flag allows you to specify the level of parallelism for commands where network can be a bottleneck (namely provision and lift). Passing a value of 0 effectively disable throttling, which means that all provisioning will be done in parallel.

Container Prefixes

It is possible to prefix containers with a global --prefix flag, which is just prepended to the container name. Remember that you will have to provide the same prefix for subsequent calls if you want to address the same set of containers. A common use case for this feature is to launch a set of containers in parallel, e.g. for CI builds. Container prefixes can also be supplied by the CRANE_PREFIX environment variable.

Override image tag

By using a the --tag flag, it is possible to globally overrides image tags. If you specify --tag 2.0-rc2, an image name repo/app:1.0 is treated as repo/app:2.0-rc2. The CRANE_TAG environment variable can also be used to set the global tag.

Generate command

The generate command can transform (part of) the configuration based on a given template, making it easy to re-use the configuation with other tools. --template is a required flag, which should point to a Go template. By default, the output is printed to STDOUT. It can also be written to a file using the --output flag. If the given filename contains %s, then multiple files are written (one per container), substituting %s with the name of the container. For each container, an object of type ContainerInfo is passed to the template. If one file is generated for all targeted containers, a list of containers is located under the key Containers. This feature is experimental, which means it can be changed or even removed in every minor version update.

Example templates can be found at crane-templates.

YAML advanced usage

YAML gives you some advanced features like alias and merge. They allow you to easily avoid duplicated code in your crane.yml file. As a example, imagine you need to define 2 different containers: web and admin. They share almost the same configuration but the cmd declaration. And imagine you also need 2 instances for each one for using with a node balancer. Then you can declare them as simply:

  web1: &web
    image: my-web-app
    run: &web-run
      link: ["db:db"]
      cmd: web
  web2: *web

  admin1: &admin { <<: *web, run: { <<: *web-run , cmd: admin }}
  admin2: *admin

As a summary, &anchor declares the anchor property, *alias is the alias indicator to simply copy the mapping it references, and <<: *merge includes all the mapping but let you override some keys.

Copyright & Licensing

Copyright © 2013-2016 Michael Sauter. See the LICENSE file for details.

GoDoc Build Status

Related Repositories



Crane - Lift containers with ease ...



Control plane based on docker built-in swarmkit ...



An ORM for Common Lisp. ...



PHP Intellisense/code-completion for VS Code ...



Transparent Paxos ...

Top Contributors

michaelsauter bjaglin dreamcat4 mishak87 michaloo adrianhurt bcicen t-suwa jesper bivas lefeverd cvrebert jsierles ThePixelDeveloper pdalpra damm TeaBough tmc eggtree gissehel


-   v2.10.1 zip tar
-   v2.10.0 zip tar
-   v2.9.1 zip tar
-   v2.9.0 zip tar
-   v2.8.2 zip tar
-   v2.8.1 zip tar
-   v2.8.0 zip tar
-   v2.7.0 zip tar
-   v2.6.1 zip tar
-   v2.6.0 zip tar
-   v2.5.2 zip tar
-   v2.5.1 zip tar
-   v2.5.0 zip tar
-   v2.4.0 zip tar
-   v2.3.1 zip tar
-   v2.3.0 zip tar
-   v2.2.0 zip tar
-   v2.1.0 zip tar
-   v2.0.1 zip tar
-   v2.0.0 zip tar
-   v2.0.0-rc2 zip tar
-   v2.0.0-rc1 zip tar
-   v1.5.1 zip tar
-   v1.5.0 zip tar
-   v1.4.0 zip tar
-   v1.3.1 zip tar
-   v1.3.0 zip tar
-   v1.2.0 zip tar
-   v1.1.1 zip tar
-   v1.1.0 zip tar