spring-cloud-bus travis-ci

Spring Cloud event bus

// Do not edit this file (e.g. go instead to src/main/asciidoc)

= Spring Cloud Bus

Spring Cloud Bus links nodes of a distributed system with a lightweight message broker. This can then be used to broadcast state changes (e.g. configuration changes) or other management instructions. A key idea is that the Bus is like a distributed Actuator for a Spring Boot application that is scaled out, but it can also be used as a communication channel between apps. The only implementation currently is with an AMQP broker as the transport, but the same basic feature set (and some more depending on the transport) is on the roadmap for other transports.

== Quick Start

Spring Cloud Bus works by adding Spring Boot autconfiguration if it detects itself on the classpath. All you need to do to enable the bus is to add spring-cloud-starter-bus-amqp or spring-cloud-starter-bus-kafka to your dependency management and Spring Cloud takes care of the rest. Make sure the broker (RabbitMQ or Kafka) is available and configured: running on localhost you shouldn’t have to do anything, but if you are running remotely use Spring Cloud Connectors, or Spring Boot conventions to define the broker credentials, e.g. for Rabbit


spring: rabbitmq: host: mybroker.com port: 5672 username: user

password: secret

The bus currently supports sending messages to all nodes listening or all nodes for a particular service (as defined by Eureka). More selector criteria may be added in the future (ie. only service X nodes in data center Y, etc…). There are also some http endpoints are under the /bus/* actuator namespace. There are currently two implemented. The first, /bus/env, sends key/values pairs to update each nodes Spring Environment. The second, /bus/refresh, will reload each application’s configuration, just as if they had all been pinged on their /refresh endpoint.

NOTE: the Bus starters cover Rabbit and Kafka, because those are the two most common implementations, but Spring Cloud Stream is quite flexible and binder will work combined with spring-cloud-bus.

== Building

:jdkversion: 1.7

=== Basic Compile and Test

To build the source you will need to install JDK {jdkversion}.

Spring Cloud uses Maven for most build-related activities, and you should be able to get off the ground quite quickly by cloning the project you are interested in and typing

$ ./mvnw install

NOTE: You can also install Maven (>=3.3.3) yourself and run the mvn command in place of ./mvnw in the examples below. If you do that you also might need to add -P spring if your local Maven settings do not contain repository declarations for spring pre-release artifacts.

NOTE: Be aware that you might need to increase the amount of memory available to Maven by setting a MAVEN_OPTS environment variable with a value like -Xmx512m -XX:MaxPermSize=128m. We try to cover this in the .mvn configuration, so if you find you have to do it to make a build succeed, please raise a ticket to get the settings added to source control.

For hints on how to build the project look in .travis.yml if there is one. There should be a “script” and maybe “install” command. Also look at the “services” section to see if any services need to be running locally (e.g. mongo or rabbit). Ignore the git-related bits that you might find in “before_install” since they’re related to setting git credentials and you already have those.

The projects that require middleware generally include a docker-compose.yml, so consider using http://compose.docker.io/[Docker Compose] to run the middeware servers in Docker containers. See the README in the https://github.com/spring-cloud-samples/scripts[scripts demo repository] for specific instructions about the common cases of mongo, rabbit and redis.

NOTE: If all else fails, build with the command from .travis.yml (usually ./mvnw install).

=== Documentation

The spring-cloud-build module has a “docs” profile, and if you switch that on it will try to build asciidoc sources from src/main/asciidoc. As part of that process it will look for a README.adoc and process it by loading all the includes, but not parsing or rendering it, just copying it to ${main.basedir} (defaults to ${basedir}, i.e. the root of the project). If there are any changes in the README it will then show up after a Maven build as a modified file in the correct place. Just commit it and push the change.

=== Working with the code If you don’t have an IDE preference we would recommend that you use http://www.springsource.com/developer/sts[Spring Tools Suite] or http://eclipse.org[Eclipse] when working with the code. We use the http://eclipse.org/m2e/[m2eclipe] eclipse plugin for maven support. Other IDEs and tools should also work without issue as long as they use Maven 3.3.3 or better.

==== Importing into eclipse with m2eclipse We recommend the http://eclipse.org/m2e/[m2eclipe] eclipse plugin when working with eclipse. If you don’t already have m2eclipse installed it is available from the “eclipse marketplace”.

NOTE: Older versions of m2e do not support Maven 3.3, so once the projects are imported into Eclipse you will also need to tell m2eclipse to use the right profile for the projects. If you see many different errors related to the POMs in the projects, check that you have an up to date installation. If you can’t upgrade m2e, add the “spring” profile to your settings.xml. Alternatively you can copy the repository settings from the “spring” profile of the parent pom into your settings.xml.

==== Importing into eclipse without m2eclipse If you prefer not to use m2eclipse you can generate eclipse project metadata using the following command:


$ ./mvnw eclipse:eclipse

The generated eclipse projects can be imported by selecting import existing projects from the file menu.

== Contributing

Spring Cloud is released under the non-restrictive Apache 2.0 license, and follows a very standard Github development process, using Github tracker for issues and merging pull requests into master. If you want to contribute even something trivial please do not hesitate, but follow the guidelines below.

=== Sign the Contributor License Agreement Before we accept a non-trivial patch or pull request we will need you to sign the https://cla.pivotal.io/sign/spring[Contributor License Agreement]. Signing the contributor’s agreement does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do. Active contributors might be asked to join the core team, and given the ability to merge pull requests.

=== Code of Conduct This project adheres to the Contributor Covenant https://github.com/spring-cloud/spring-cloud-build/blob/master/docs/src/main/asciidoc/code-of-conduct.adoc[code of conduct]. By participating, you are expected to uphold this code. Please report unacceptable behavior to [email protected]

=== Code Conventions and Housekeeping None of these is essential for a pull request, but they will all help. They can also be added after the original pull request but before a merge.

  • Use the Spring Framework code format conventions. If you use Eclipse you can import formatter settings using the eclipse-code-formatter.xml file from the https://raw.githubusercontent.com/spring-cloud/spring-cloud-build/master/spring-cloud-dependencies-parent/eclipse-code-formatter.xml[Spring Cloud Build] project. If using IntelliJ, you can use the http://plugins.jetbrains.com/plugin/6546[Eclipse Code Formatter Plugin] to import the same file.
  • Make sure all new .java files to have a simple Javadoc class comment with at least an @author tag identifying you, and preferably at least a paragraph on what the class is for.
  • Add the ASF license header comment to all new .java files (copy from existing files in the project)
  • Add yourself as an @author to the .java files that you modify substantially (more than cosmetic changes).
  • Add some Javadocs and, if you change the namespace, some XSD doc elements.
  • A few unit tests would help a lot as well – someone has to do it.
  • If no-one else is using your branch, please rebase it against the current master (or other target branch in the main project).
  • When writing a commit message please follow http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html[these conventions], if you are fixing an existing issue please add Fixes gh-XXXX at the end of the commit message (where XXXX is the issue number).

Related Repositories



Spring Cloud event bus ...



Spring Cloud Bus Demo ...



Demo app for spring-cloud-bus and spring-cloud-config ...



Spring Cloud Bus Sample ...

Top Contributors

dsyer spencergibb marcingrzejszczak mbogoevici donovanmuller behrangsa maxromanovsky SirWayne dl1ely


-   v1.2.1.RELEASE zip tar
-   v1.2.0.RELEASE zip tar
-   v1.2.0.RC1 zip tar
-   v1.2.0.M1 zip tar
-   v1.1.1.RELEASE zip tar
-   v1.1.0.RELEASE zip tar
-   v1.1.0.RC2 zip tar
-   v1.1.0.RC1 zip tar
-   v1.1.0.M5 zip tar
-   v1.1.0.M4 zip tar
-   v1.1.0.M3 zip tar
-   v1.1.0.M2 zip tar
-   v1.1.0.M1 zip tar
-   v1.0.3.RELEASE zip tar
-   v1.0.2.RELEASE zip tar
-   v1.0.1.RELEASE zip tar
-   v1.0.0.RELEASE zip tar
-   v1.0.0.RC3 zip tar
-   v1.0.0.RC2 zip tar
-   v1.0.0.RC1 zip tar
-   v1.0.0.M3 zip tar
-   1.0.0.M1 zip tar